residual current operated circuit-breakers with integral overcurrent protection DRCBO 4 B13/0,03/1N-B+
- AC-DC sensitive for increased fire prevention
- higher system availability: short-time delayed
- VDE certified
residual current operated circuit-breakers with integral overcurrent protection DRCBO 4 B13/0,03/1N-B+
- AC-DC sensitive for increased fire prevention
- higher system availability: short-time delayed
- VDE certified
Details
Residual current operated circuit-breaker with integral overcurrent protection, one-pole+N, 13 A, 0,03 A, B-characteristic, Type B+, short-time delayed
RCBOs combine residual current protection and overcurrent protection in a single device. This makes them ideal for use in distribution boards where space is limited. The rated breaking capacity of the DRCBO 4 series is 6 kA. Type B+ circuit-breakers are AC-DC sensitive. They meet VDE fire protection requirements at 420 mA for frequencies up to 20 kHz. With tripping characteristic B, these circuit-breakers ensure reliable protection for your circuits without high inrush currents. Standard circuit-breakers are designed for circuits with 230 V or 400 V at 50 Hz.
AC/DC sensitive for residual currents with frequencies of 0 Hz (smooth direct current) up to 20,000 Hz, mains-voltage-independent tripping when type A residual currents occur, compact design for all rated currents, switch position indicator, separate indication of tripping cause, strain-relief clamps with a wide terminal cross-section range on both connection sides, neutral conductor right, labelling area
quick fastening to mounting rail, any installation position, supply preferably from above
commercial and industrial installations with TT, TN-S and TN-C-S systems, where power electronics equipment is used without galvanic isolation from the mains, e.g. frequency converters, switching power supplies, high-frequency converters, photovoltaic installations and UPS equipment with frequency converters without transformers, Type B+ and type B RCBOs with characteristic curve NK should be used where fire protection is legally required.
suitable for use in 50 Hz AC networks, RCBOs are also available for other frequencies upon request, not designed for use in direct current networks or on the output side of controlled electrical equipment such as frequency converters
- Operating instructions
- Data sheet
- Prospectus Circuit-breaker overview
- Technical information derating graph
- Text for invitation to tender RTF
- Text for invitation to tender GAEB XML
- Text for invitation to tender GAEB 2000
- Text for invitation to tender GAEB 90
- Dimensional drawing Group view
- STEP file
- Wiring diagram
- Characteristic B+ 30 mA
Residual current operated circuit-breaker with integral overcurrent protection, one-pole+N, 13 A, 0,03 A, B-characteristic, Type B+, short-time delayed
RCBOs combine residual current protection and overcurrent protection in a single device. This makes them ideal for use in distribution boards where space is limited. The rated breaking capacity of the DRCBO 4 series is 6 kA. Type B+ circuit-breakers are AC-DC sensitive. They meet VDE fire protection requirements at 420 mA for frequencies up to 20 kHz. With tripping characteristic B, these circuit-breakers ensure reliable protection for your circuits without high inrush currents. Standard circuit-breakers are designed for circuits with 230 V or 400 V at 50 Hz.
AC/DC sensitive for residual currents with frequencies of 0 Hz (smooth direct current) up to 20,000 Hz, mains-voltage-independent tripping when type A residual currents occur, compact design for all rated currents, switch position indicator, separate indication of tripping cause, strain-relief clamps with a wide terminal cross-section range on both connection sides, neutral conductor right, labelling area
quick fastening to mounting rail, any installation position, supply preferably from above
commercial and industrial installations with TT, TN-S and TN-C-S systems, where power electronics equipment is used without galvanic isolation from the mains, e.g. frequency converters, switching power supplies, high-frequency converters, photovoltaic installations and UPS equipment with frequency converters without transformers, Type B+ and type B RCBOs with characteristic curve NK should be used where fire protection is legally required.
suitable for use in 50 Hz AC networks, RCBOs are also available for other frequencies upon request, not designed for use in direct current networks or on the output side of controlled electrical equipment such as frequency converters
- Operating instructions
- Data sheet
- Prospectus Circuit-breaker overview
- Technical information derating graph
- Text for invitation to tender RTF
- Text for invitation to tender GAEB XML
- Text for invitation to tender GAEB 2000
- Text for invitation to tender GAEB 90
- Dimensional drawing Group view
- STEP file
- Wiring diagram
- Characteristic B+ 30 mA
Supplies
