Do you need help?
portrait
Your customer account manager
Marcus Häbel
Support for all products

T :
+49 4931 1806-888
E :
support at doepke dot de

wiring components BG4.3.10

09920155, Busbar for DRCBO 4 type B/B+, fork, 4-pole, 10 mm², 13 MW (module width), 63 A
  • Design fork
  • Length 232 mm
  • large cross-section (10 mm²), high rated current of 63 A

wiring components BG4.3.10

09920155, Busbar for DRCBO 4 type B/B+, fork, 4-pole, 10 mm², 13 MW (module width), 63 A
  • Design fork
  • Length 232 mm
  • large cross-section (10 mm²), high rated current of 63 A

Details

Busbar for DRCBO 4 type B/B+, fork, 4-pole, 10 mm², 13 MW (module width), 63 A

These components for the wiring of circuit breakers in industrial, commercial and privately used electrical distribution units significantly reduce the installation work. The cut-to-length busbars of the Eurovario system lend themselves to the supply-side connection of residual current circuit-breakers with integral overcurrent protection combinations DRCBO 4 B+ and B on the underside of the device. The rails have a fork design and are available with two and four poles. The EV-S BS contact protector does not cover connections used.

Eurovario system phase bar in forked design with a fixed number of module widths, these rails are not suitable for cutting to length

The rails are inserted in the lower terminals of the devices to be connected.

Busbars from this series are used for residual current circuit-breakers with overcurrent protection (RCCB/MCB combination) of the series DRCBO 4 type B and B+ in power supplies to residential and purpose-built buildings as well as to industrial facilities.

Protective cover only when using “EV-S BS” protective caps for connections that are not used. Higher current can be supplied in the case of joint central supply. Maximum supply current Ie > rail current Is. See diagram.

Busbar for DRCBO 4 type B/B+, fork, 4-pole, 10 mm², 13 MW (module width), 63 A

These components for the wiring of circuit breakers in industrial, commercial and privately used electrical distribution units significantly reduce the installation work. The cut-to-length busbars of the Eurovario system lend themselves to the supply-side connection of residual current circuit-breakers with integral overcurrent protection combinations DRCBO 4 B+ and B on the underside of the device. The rails have a fork design and are available with two and four poles. The EV-S BS contact protector does not cover connections used.

Eurovario system phase bar in forked design with a fixed number of module widths, these rails are not suitable for cutting to length

The rails are inserted in the lower terminals of the devices to be connected.

Busbars from this series are used for residual current circuit-breakers with overcurrent protection (RCCB/MCB combination) of the series DRCBO 4 type B and B+ in power supplies to residential and purpose-built buildings as well as to industrial facilities.

Protective cover only when using “EV-S BS” protective caps for connections that are not used. Higher current can be supplied in the case of joint central supply. Maximum supply current Ie > rail current Is. See diagram.