impulse switch with central control, 230 V AC, 16 A, 1 NO
Function:
Latching relay, also: Remote or pulse switch; switches on due to an electrical pulse and switched off by another pulse. The impulse relays (remote switches) in series RS are suitable for switching electrical consumers up to 16 A in intermittent operation. This design of impulse relays is suitable for mounting in in-wall sockets/boxes but also in cable ducts or recessed spaces. This impulse relay design also has inputs for central commands in addition to the local command inputs.
Features:
high flexibility thanks to different contact configurations, contour and terminal-compatibility with installation relay program, Option of visual display of operating status via LED, low switching noise and no humming or buzzing, Duty cycle: 100 % with spacer 0,5 mod. widths, switch position indicator on the front, Glow lamps parallel to control keys possible, easy connection thanks to generously dimensioned, captive terminals, connection wires cannot become lodged behind the terminals, easy accessibility for connecting coil supply, protected against direct contact under BGV A3, Quick-snap fastening for the 35 mm mounting rail, Local and central control, two-level groups can be switched (RSZ only)
Mounting method:
quick fastening to mounting rail, any installation position
Applications:
The components offer universal use for control tasks in industrial and building systems as well as in domestic installations. They are especially suitable for switching lighting systems, electric heaters, fans, air conditioning systems, ventilators, heat pumps and glow and gas-discharge lamps.
Hints:
The designation for the devices in the RS series includes the rated voltage (first group of digits) and the contact design (final group of digits), which is listed in the following order: normally opened contact, normally closed contact and changeover contact. A "RS024-110" therefore has a rated voltage of 24 V, one normally opened contact and one normally closed contact, but no changeover contact, The duty cycle is limited to max. 1 h. To reach 100 % duty cycle, the DHDS spacer must be used on both sides, Glow lamps switched in parallel from luminaire switches generate reactive currents that, if excessive, can be offset by a capacitor block to prevent coil overheating.
)