Do you need help?
portrait
Your customer account manager
Marcus Häbel
Support for all products

T:
+49 4931 1806-888
E:
support at doepke dot de

float switches Champ 1 GS-L 10 m

09921007, Float switches (empty), Connection cable 10 m, rubber cable, protective conductor
* Picture similar to the actual unit
  • Float switch function empty
  • integrated protective conductor
  • Cable length 10 m

float switches Champ 1 GS-L 10 m

09921007, Float switches (empty), Connection cable 10 m, rubber cable, protective conductor
* Picture similar to the actual unit
  • Float switch function empty
  • integrated protective conductor
  • Cable length 10 m

Details

Float switches (empty), Connection cable 10 m, rubber cable, protective conductor

Float switches respond to previously defined liquid fill levels. For example, they control pumps for filling and draining, or trigger an alarm at defined fill levels. The devices from the Champ series are equipped with either a NO or changeover contact and can monitor up to two different fixed point levels. If the fill level in the tank rises or falls, the position of the float switch changes, so that the contacts open or close at a definable fill level. An optional movable weight on the float switch cable can be used to set a corresponding float switch position for each fill level. The switching hysteresis, e.g. between "pump on" and "pump off" is fixed. The switching contact is installed in a robust, durable plastic housing. The float switch forms a hermetically sealed unit with the connection cable. The "L" breaker design has the "drain" function. The connection cable for devices of the "GS" variant is made of rubber and provided with a protective earthing conductor (PE). Devices of the standard variant are suited for use in standard environments, e. g. for water tanks.

high switching reliability thanks to low-wear ball guide, easy to set the float switch using a counterweight that is available as an option, Housing material made of non-toxic PP, highly flexible neoprene connection cable

The most important application areas are pumps and drainage systems, wastewater or the chemicals industry, and anywhere where reliable fixed point detection in liquids is required.

not suitable for DC and low voltage, not suitable for use in potable water

Float switches (empty), Connection cable 10 m, rubber cable, protective conductor

Float switches respond to previously defined liquid fill levels. For example, they control pumps for filling and draining, or trigger an alarm at defined fill levels. The devices from the Champ series are equipped with either a NO or changeover contact and can monitor up to two different fixed point levels. If the fill level in the tank rises or falls, the position of the float switch changes, so that the contacts open or close at a definable fill level. An optional movable weight on the float switch cable can be used to set a corresponding float switch position for each fill level. The switching hysteresis, e.g. between "pump on" and "pump off" is fixed. The switching contact is installed in a robust, durable plastic housing. The float switch forms a hermetically sealed unit with the connection cable. The "L" breaker design has the "drain" function. The connection cable for devices of the "GS" variant is made of rubber and provided with a protective earthing conductor (PE). Devices of the standard variant are suited for use in standard environments, e. g. for water tanks.

high switching reliability thanks to low-wear ball guide, easy to set the float switch using a counterweight that is available as an option, Housing material made of non-toxic PP, highly flexible neoprene connection cable

The most important application areas are pumps and drainage systems, wastewater or the chemicals industry, and anywhere where reliable fixed point detection in liquids is required.

not suitable for DC and low voltage, not suitable for use in potable water