Do you need help?
portrait
Your customer account manager
Marcus Häbel
Support for all products

T :
+49 4931 1806-888
E :
support at doepke dot de

wiring components B G12TE-1/N/S-10

09920130, DAFDD busbar, fork, 2-pole, 10 mm²
  • for the supply-side wiring of the AFDD
  • Design fork
  • Length 202 mm
  • large cross-section (10 mm²), high rated current of 63 A

wiring components B G12TE-1/N/S-10

09920130, DAFDD busbar, fork, 2-pole, 10 mm²
  • for the supply-side wiring of the AFDD
  • Design fork
  • Length 202 mm
  • large cross-section (10 mm²), high rated current of 63 A

Details

DAFDD busbar, fork, 2-pole, 10 mm²

These components for the wiring of circuit breakers in industrial, commercial and privately used electrical distribution units significantly reduce the installation work. The busbars are designed for our DAFDD 1 arc fault detection devices (fire protection switches, AFDD). The third module width of each bar was given a recess for the AFD unit for this purpose. The fork-shaped bars are available in two-terminal and two-terminal-pair designs. The bars establish a quick supply-side connection under the devices and are available in two lengths. They are ready to use immediately in 12 module width units and do not need further modification. They offer space for a total of four DAFDD 1 devices. The busbars which can be cut to length are 60 module width units long and offer space for up to 20 DAFDD 1 devices. They can be shortened to the required length as needed. The open ends of the cut bar are then covered with our 'EK' end caps. Suitable for all bars, the 'EV-S BS' protective caps can be used to cover connections which are not in use. The bars offer an overview of the wiring and provide significant time and cost savings.

can be used to connect DAFDD 1 arc fault detection devices (fire protection switches, AFDD), two-terminal or two-terminal-pair, can be cut to length as desired, saves a lot of time during wiring

The rails are inserted in the lower terminals of the devices to be connected.

Busbars from this series are used in connection with DAFDD 1 in power supplies to residential and purpose-built buildings as well as to industrial facilities.

DAFDD busbar, fork, 2-pole, 10 mm²

These components for the wiring of circuit breakers in industrial, commercial and privately used electrical distribution units significantly reduce the installation work. The busbars are designed for our DAFDD 1 arc fault detection devices (fire protection switches, AFDD). The third module width of each bar was given a recess for the AFD unit for this purpose. The fork-shaped bars are available in two-terminal and two-terminal-pair designs. The bars establish a quick supply-side connection under the devices and are available in two lengths. They are ready to use immediately in 12 module width units and do not need further modification. They offer space for a total of four DAFDD 1 devices. The busbars which can be cut to length are 60 module width units long and offer space for up to 20 DAFDD 1 devices. They can be shortened to the required length as needed. The open ends of the cut bar are then covered with our 'EK' end caps. Suitable for all bars, the 'EV-S BS' protective caps can be used to cover connections which are not in use. The bars offer an overview of the wiring and provide significant time and cost savings.

can be used to connect DAFDD 1 arc fault detection devices (fire protection switches, AFDD), two-terminal or two-terminal-pair, can be cut to length as desired, saves a lot of time during wiring

The rails are inserted in the lower terminals of the devices to be connected.

Busbars from this series are used in connection with DAFDD 1 in power supplies to residential and purpose-built buildings as well as to industrial facilities.