Do you need help?
portrait
Your customer account manager
Marcus Häbel
Support for all products

T:
+49 4931 1806-888
E:
support at doepke dot de

light control devices LT 0500

09500226, remote dimmer consumer, 500 VA
Discontinued product - Please ask for availability
  • dims luminaires with up to 500 VA
  • Operation via a separately available control device
  • Changeable operating mode (leading and trailing edge)
Discontinued

light control devices LT 0500

09500226, remote dimmer consumer, 500 VA
Discontinued product - Please ask for availability
  • dims luminaires with up to 500 VA
  • Operation via a separately available control device
  • Changeable operating mode (leading and trailing edge)

Details

remote dimmer consumer, 500 VA

The lighting can be operated centrally using lighting control devices. Power units for light intensity control of all standard type of illuminations, such as e.g. incandescent lamps, high-voltage and low-voltage halogen lamps with electric or conventional transformers. The load modules are suitable for connection to a control unit (RUD 2, SIDI 2), or to the LSG 1 lighting scenes control device. Parallel connection at output side of two LT 1200 is also possible. Selecting the end stages then enables flexible adaption of the control power to the lamp load. If the operating mode has been set incorrectly, or in the event of a short-circuit, the LT 500 and LT 12000 will automatically disconnect the load. In addition, both devices are equipped with thermal overload protection, electronic short-circuit cut-out, overvoltage protection and a soft-start function. The load output stages are also provided with electronic half-wave balancing and idle monitoring. This ensures the prevention of magnetic bias when conventional mains transformers are connected and of overvoltages when idling. Up to 10 load units can be actuated via the Puls Width Modulation (PWM) signal output of a remote dimmer, a dimmer control unit or a lighting scene control device, and can be operated either in a normal or reverse phase control mode. It is also permissible to connect two stages in parallel at the output side. Selection of the output stages thus enables the control to be flexibly adapted to the lamp load.

dimming power LT 500: 10 VA - 500 VA (2 MW), dimming power LT 1200: 10 VA - 1200 VA (4 MW), leading and trailing edge dimmers, parallel switching of two LT 1200 possible at the output (2150 VA)

quick fastening to mounting rail, any installation position

Lighting control in buildings with extensive artificial lighting such as Banqueting and theatre halls, Churches, Restaurants, etc.

The function is not guaranteed to dim compact fluorescent lamps (energy savings lamps) or LED lights.

remote dimmer consumer, 500 VA

The lighting can be operated centrally using lighting control devices. Power units for light intensity control of all standard type of illuminations, such as e.g. incandescent lamps, high-voltage and low-voltage halogen lamps with electric or conventional transformers. The load modules are suitable for connection to a control unit (RUD 2, SIDI 2), or to the LSG 1 lighting scenes control device. Parallel connection at output side of two LT 1200 is also possible. Selecting the end stages then enables flexible adaption of the control power to the lamp load. If the operating mode has been set incorrectly, or in the event of a short-circuit, the LT 500 and LT 12000 will automatically disconnect the load. In addition, both devices are equipped with thermal overload protection, electronic short-circuit cut-out, overvoltage protection and a soft-start function. The load output stages are also provided with electronic half-wave balancing and idle monitoring. This ensures the prevention of magnetic bias when conventional mains transformers are connected and of overvoltages when idling. Up to 10 load units can be actuated via the Puls Width Modulation (PWM) signal output of a remote dimmer, a dimmer control unit or a lighting scene control device, and can be operated either in a normal or reverse phase control mode. It is also permissible to connect two stages in parallel at the output side. Selection of the output stages thus enables the control to be flexibly adapted to the lamp load.

dimming power LT 500: 10 VA - 500 VA (2 MW), dimming power LT 1200: 10 VA - 1200 VA (4 MW), leading and trailing edge dimmers, parallel switching of two LT 1200 possible at the output (2150 VA)

quick fastening to mounting rail, any installation position

Lighting control in buildings with extensive artificial lighting such as Banqueting and theatre halls, Churches, Restaurants, etc.

The function is not guaranteed to dim compact fluorescent lamps (energy savings lamps) or LED lights.